Anker debuted a slate of new Smart Display charging gear this year, from the MagSafe power bank to the impressive new display-laden travel charger, but it also debuted a new Nano 10-in-1 Smart Display Hub and it is now available on Amazon at $99.
New Anker Nano 10-in-1 Smart Display Hub
The new Nano hub lands with a 10-in-1 design, dual display docking support, and a built-in Smart Display that showcases real-time port status, charging power, data transfer speed, and device temperature. However this time you can also upload your own images “for a rotating slideshow, or press twice to start the customizable focus timer.”
Joining simple touch control along the top of the unit, you’ll have access to the following in terms of I/O:
- One HDMI 2.1 port
- One DisplayPort 1.4 port
- One 100W max PD-IN port for up to 80W host charging
- One 10 Gbps USB-C port
- One 10 Gbps USB-A data port
- Two 5 Gbps USB-A ports
- One Gigabit Ethernet port
- SD/microSD 3.0 card slots.
With 80% of ports facing the rear, cables route backward and downward to reduce the clutter common with flat hub designs.
It ships with a magnetic base and delivers dual display support as well:
Drive a single monitor at up to 4K@144 Hz or 2K@240 Hz, or expand to dual 2K@240 Hz displays for ultra-smooth motion in gaming, editing, and streaming. (Note: Dual 2K@240 Hz output requires a host laptop USB-C port that supports DP 2.1 with DSC 3:1. Video output is supported through HDMI and DisplayPort only.)
The new Nano 10-in-1 Smart Display Hub lands as a far more affordable Smart Display docking station than some of its latest charging station and dock combos at $99, while also providing more than enough I/O potential for just any average workstation setup.
Scope out more of Anker’s latest below:
FTC: We use income earning auto affiliate links. More.
Comments